©
2008 Weltron Winston
International, Ltd. 200 Hillsboro Street • Oxford, NC 27565 Phone: (919) 693-1561 Toll Free: (800) 726-1411 Fax: (919) 693-5257
PC Cables & Accessories Index
90-700
FireWire 6pin - 6pin
IEEE 1394
90-702
FireWire 4pin - 4pin
IEEE 1394
90-704
FireWire 9pin - 4pin
IEEE 1394a - IEEE 1394b
90-USB-AB
USB Male A - USB Male B
90-USB-AAEX
USB Male A - USB Female A
90-USBAEC-15
15’ Active Extension
USB Male A - USB Female A
Compliant with USB 2.0
Extends up to 75 foot (serially connecting up to 5 segments)
90-USB-AA
USB Male A - USB Male A
90-USB-AMIN
USB Male A - USB Mini 4 Pin
91-632
USB Line Extender
Extends the distance to any USB 1.1 device by up to 150 ft.
Requires one standard RJ45 patch cable. Embedded transceivers
enhance signal and prevent signal loss.
90-701
FireWire 6pin - 4pin
IEEE 1394
90-703
FireWire 9pin - 6pin
IEEE 1394a - IEEE 1394b
90-705
FireWire 9pin - 9pin
IEEE 1394b - IEEE 1394b
800 MHz
USB 2.0 - 2 Port
Built in connection cable. USB 2.0 Mini Hub. Bus powered.
USB 1.1 Extender
This unique USB extender lets you locate your USB device
or hub up to 150 feet from you computer, overcoming the
typical 15-foot USB cable limitation.
FireWire Hubs
Instantly adds additional FireWire ports. Automatically detects
transfer rate. LEDs for power and data transmission. Up to 63
devices supported.
USB 2.0 - 4 Port
Provides 4 Hi-Speed USB 2.0 ports. Compact design, overcurrent
protection. Bus or AC powered.
USB 2.0 Sharing Hub - 4 Port
This unique USB extender lets you locate your USB device
or hub up to 150 feet from you computer, overcoming the
typical 15-foot USB cable limitation.
USB 2.0 - 7 Port
USB 1.1 backwards compatible. All 7 ports have automatic speed
detection and over current protection. Supports Self power mode. AC Adapter Included.
IEEE-139a (FireWire™400) Gender Changer & Adapter
IEEE-139a (FireWire™400) Gender Changer & Adapter
IEEE-139a (FireWire™400) Gender Changer & Adapter
AB Type Switch Box, Two Position
AB Type Switch Box, Two Position
AB Type Switch Box, Two Position
AB Type USB Switch Box
Modular Jack Switches
These switches provide manual switching for modular applications. They are
available with 6 position
modular jacks (RJ-12) or 8 position modular jacks (RJ-45).
AB, RJ-45, 8 Wire Switch Box
BNC and Twinax Switches
These switches provide switching for BNC cables such as RG-58 & RG-59,
Twinax cables for
AS/400 and System 3X.
Keyboard/Monitor Switch Boxes
These switches provide switching for both the keyboard and monitor for PC’s
or IBM PS/2’s.
Monitors can use the 9 pin D or the HD15 (VGA) connector.
USB Gender Changers & Adapters
USB A Male / A Female
USB A Male / A Female
USB A Male / B Female
USB A Male / B Male
USB A Male / B Female
USB A Female / Mini 4
Pin Male
USB A Female / Mini 5 Pin Male
USB B Female / Mini 4
Pin Male
USB B Female / Mini 5
Pin Male
USB to Logitech Mouse
Adapter A Male / Mini
DIN 6 Female
USB to Logitech Mouse
Adapter A Female / Mini
DIN 6 Male
8 in. Panel Mount USB A
Male to Panle Mount Female
2 Port Mini KVM Switch with Integrated Cables
Control two computers with one keyboard, monitor and mouse.
Simply plug in the attached cables. nothing else required. Space
saving design with all required cables attached. Video enhancement
supports resolutions up to 1620x1440. “Hot Key” commands and LED
indica- tors for computer selection. Full keyboard and mouse emulation
for error free boot-up. Quickly install by simply connecting the cables.
No softwre required. Windows 98/Me/2000/XP compatible, plus Linus,
FreeBSD, not Mac.

USB KVM Switches
Control up to four PCs or Macs from one keyboard, monitor and mouse.
Works with MAC and PC simultaneously. Built-in 2/4 port usb hub
allows you to share up to 4 USB devices among the connected
computers. The selected computer has access to the four shared USB
devices. No software required. Works independently from computer
operating systems allows attached computers to run different operating
systems. Supports up to 1920x1440 resolution. Switch between PCS
with the push of a button. Requires one USB A-B cable and one SVGA
HD15 m/f cable for each computer. Requires cables

USB KVM Switches
Control up to four PCs or Macs from one keyboard, monitor and mouse.
Works with MAC and PC simultaneously. Built-in 2/4 port usb hub
allows you to share up to 4 USB devices among the connected
computers. The selected computer has access to the four shared USB
devices. No software required. Works independently from computer
operating systems allows attached computers to run different operating
systems. Supports up to 1920x1440 resolution. Switch between PCS
with the push of a button. Requires one USB A-B cable and one SVGA
HD15 m/f cable for each computer. Requires cables
4/8 Port KVM Switch with OSD
On Screen Display. Name your computers. Switch computers from the
list. Display systems status - all on screen.
16 Port KVM Switch with OSD
Manage/control up to sixteen computers from one keyboard, monitor
and mouse. Pop-up On Screen Display menu enbales you to assign
computer names then identify and select com- puters by the names.
Password security to prevent unauthorized access. No software
required. Works independently of computer operating systems, allowing
the attached com- puters to run different operating systems. Hot Plug
and Play, no need to shut down the KVM switch to attach or remove PCs.
Mouse conversion technology, one PS2 mouse controls computers using
PS2 or Serial mice. Supports intellimouse and intellitrack mice. Switch
between PCs with the press of a button or keyboard {hot key) commands.
Supports 1920x1440 resolution. Requires cables.
Auto Switches & Converters
Serial to Parallel Converters
These devices can be used to convert a serial output to a parallel output or
a
parallel output to a serial output for printer applications.
Auto Switches
These printer sharing devices allow multiple computers to share one printer.
The non-powered 2 to 1 auto
switch has two input ports and one parallel printer output port. Timeout is
6-8 seconds and scanning time is
.25 seconds. The 4 to 1 powered printer sharing devices provide automatic or
manual switching. A dipswitch
enables the user to adjust the timeout period and to enable/disable the form
feed feature. The signal
protocol is only 6 x 4 x 1 inches. It is provided with velcro adhesive pad
for easy mounting. It has LED’s for
signaling which device is active and whether it is in manual or automatic mode.
An optional 9V DC power
supply is available for extended distance applications.

Auto Switches
These printer sharing devices allow multiple computers to share one printer.
The non-powered 2 to 1 auto switch has two input ports and one parallel printer
output port. Timeout is 6-8 seconds and scanning time is .25 seconds. The 4
to 1 powered printer sharing devices provide automatic or manual switching.
A dipswitch enables the user to adjust the timeout period and to enable/disable
the form feed feature. The signal protocol is only 6 x 4 x 1 inches. It is
provided with velcro adhesive pad for easy mounting. It has LED’s for
signaling which device is active and whether it is in manual or automatic mode.
An optional 9V DC power supply is available for extended distance applications.

Auto Switches
These printer sharing devices allow multiple computers to share one printer.
The non-powered 2 to 1 auto switch has two input ports and one parallel printer
output port. Timeout is 6-8 seconds and scanning time is .25 seconds. The 4
to 1 powered printer sharing devices provide automatic or manual switching.
A dipswitch enables the user to adjust the timeout period and to enable/disable
the form feed feature. The signal protocol is only 6 x 4 x 1 inches. It is
provided with velcro adhesive pad for easy mounting. It has LED’s for
signaling which device is active and whether it is in manual or automatic mode.
An optional 9V DC power supply is available for extended distance applications.

Auto Switches
These printer sharing devices allow multiple computers to share one printer.
The non-powered 2 to 1 auto switch has two input ports and one parallel printer
output port. Timeout is 6-8 seconds and scanning time is .25 seconds. The 4
to 1 powered printer sharing devices provide automatic or manual switching.
A dipswitch enables the user to adjust the timeout period and to enable/disable
the form feed feature. The signal protocol is only 6 x 4 x 1 inches. It is
provided with velcro adhesive pad for easy mounting. It has LED’s for
signaling which device is active and whether it is in manual or automatic mode.
An optional 9V DC power supply is available for extended distance applications.
3200 Series 2.1 Multimedia Speaker System
2300 Series Speaker System
2100 Series Speaker System
2100 Series USB Speaker System
LCD Monitor Pole
Supports six monitors, double-link swing arms
LCD Monitor Pole
Supports two monitors, double-link swing arms
Deluxe LCD Monitor Arm