The VideoEase™ Digital Audio Balun allows a digital audio source to be connected up to 600 feet (183m) away from a digital audio decoder/amplifier via copper unshielded twisted pair (UTP).

The VideoEase S-Video Balun allows one (1) S-Video channel to be connected via two (2) unshielded twisted pairs.

The VideoEase S-Video/Audio Balun allows one (1) S-Video channel and two (2) audio channels to be connected via four (4) unshielded twisted pairs.

The VideoEase S-Video/Hi-Fi Balun allows a single S-Video signal to be transmitted via unshielded twisted pair (UTP) cable up to 1000 ft (305m) in a point-to-point connection.

WB-500012

The VideoEase Dual Audio-Video Balun allows two (2) baseband video channels and two (2) baseband audio channels to be transmitted via four (4) unshielded twisted pairs.

The VideoEase VGA Balun allows one (1) VGA video channel to be connected via four (4) twisted pairs**.

The VideoEase VGA Balun II eliminates costly and bulky VGA cable, allowing a VGA source to be connected to a VGA monitor via one (1) 4-pair Cat 5 unshielded twisted pair (UTP) cable.

The VideoEase PS/2 Converter allows a standard PS/2 keyboard and mouse to be connected to a PC up to 350 ft via Cat5 unshielded twisted pair cable in a point-to-point configuration.

The VideoEase Active VGA Balun Kit allows VGA video to be transmitted via cost-efficient unshielded copper twisted cable in a point-to-point configuration.

The VideoEase RGB Balun allows one Red, Green, Blue (RGB) or YPbPr component video channel to be transmitted via three (3) unshielded twisted pairs.

The VideoEase ™ Component Video Balun allows a single component video signal (Y, Pb, or Pr) to be transmitted via cost-effective unshielded twisted pair (UTP) cable.

The VideoEase Component Video Hub allows one (1) full component video (YPbPr/RGB) source and one (1) digital audio video source to be distributed up to eight (8) or sixteen (16) destinations depending on the model for more cost-efficient cabling. The 500250 supports up to eight (8) ports.

The Component Video/Digital Audio Balun (500050) allows one component video (YPbPr or RGB) signal and one Digital Audio signal to be transmitted via cost-effective unshielded twisted pair (UTP) cable in a point-to-point configuration.

The VideoEase Component Video/Analog Audio Balun (500052, 500053) allows one component video (YPbPr or RGB) signal and one Analog Audio signal to be transmitted via one Category 5 twisted pair cable for more cost-efficient cabling.

The VideoEase CATV Balun allows one (1) CATV, VHF and FM video signal to be transmitted via one (1) twisted pair cable in a point-to-point connection.

The VideoEase CATV Balun II (500302) allows traditional 75-ohm coaxial cable to be replaced by a single pair of Cat 5 UTP cable in the CATV, VHF and FM environments in certain applications.

The Rackmount Balun Chassis 16 is designed as a head-end cable management solution to allow any combination of MuxLab square baluns to be installed in a 19" relay rack.