49
Wireless Access Points and Accessories
LMR200 N-type Male / Male
LRM200 N-type Male / RSMA Male
LMR 200 cable (.19 dB loss per ft.)
N-Male to N-Male
LMR 200 cable (.19 dB loss per ft.)
N-Male to Reverse Polarity SMA Male
LMR400 N-type Male / Male
LMR600 N-type Male / Male
LMR 400 cable (.08 dB loss per ft.)
N-Male to N-Male
LMR 600 cable (.04 dB loss per ft.)
N-Male to N-Male
Antenna Surge Arrestor
Antenna Cable Adapter
Protects Wireless Bridges from electrical surges and spikes, Weather
proof and corrosion resistant, N-type male to female connector,
Recommended for most antenna installations, Mounting hardware includ-
N-type Jack to RP-SMA Plug Jumper Cable, 1 ft
91-500-6
6 foot (2 Meter)
91-505-6
6 foot (2 Meter)
91-505-10
10 foot (3 Meter)
91-505-25
25 foot (7.5 Meter)
91-510-25
25 foot (7.5 Meter)
91-500-50
50 foot (15 Meter)
91-500-100 100 foot (30 Meter)
91-520-50
50 foot (15 Meter)
91-520-100 100 foot (30 Meter)
INT-500418
INT-500425
108Mbps G Access Point
54Mbps G Access Point
Connects a wireless network to a traditional wired network, 10/100 Mbps
Fast Ethernet port, Backward compatible with all 802.11b and g wireless
products, Simple web based configuration, Supports bridge mode
Security:
Supports up to 152-bit WEP Encryption, Supports 802.1x (Wireless User
Authentication), WPA: Wi-Fi(TM) Protected Access (64/128-bit WEP with
TKIP, MIC, IV Expansion, Shared Key Authentication), Advanced
Encryption Standard (AES) support
Up to 54 Mbps network data transfer rate, Compatible with all 802.11b &
g wireless products, Supports Wireless Distribution System (WDS)
repeater mode, Simple web configuration
Security:
Supports up to 152-bit WEP Encryption, Supports 802.1x (Wireless User
Authentication), WPA: Wi-Fi(TM) Protected Access (64/128-bit WEP with
TKIP, MIC, IV Expansion, Shared Key Authentication), Advanced
Encryption Standard (AES) support
High Gain Omni Antenna
High Gain Panel Antenna
Ideal for increasing wireless network range and speed, 2.4 GHz frequen-
cy range, N-type female connector, 360° horizontal & 32° vertical beam
width, Mounting hardware included
Ideal for building to building wireless connections, 2.4 GHz frequency
range, Weather proof and corrosion resistant, N-type female connector
30° horizontal & vertical beam width, Mounting hardware included
INT-500432
2.4 GHz, 5 dBi
INT-521413
2.4 GHz, 8 dBi
INT-521383
2.4 GHz, 9 dBi
INT-500499
2.4 GHz, 14 dBi
INT-522755
802.11g, 108 Mbps
INT-500500
802.11g, 54 Mbps